Easy DIY Phone Charger Holder

I don’t know about you but I’m finding my phone battery runs down fast during the day. I think it’s probably the fact that I play Amazon music all day while I’m working, and possibly that I’m checking Instagram, emails and more all day. Oh and that doesn’t even count actual phone-type stuff like calls!

So I’m needing to charge it lots and I’m excited about this new easy DIY Phone Charger Holder! It keeps my phone up off the counter and all tidy, plus I can move it around to whatever room I’m in – super easy! I hate to confess the number of times I’ve tripped over my phone cord and flipped my phone onto the floor. We’ll keep that our little secret though k?

 

DIY Phone Charger Holder

It doesn’t take long to sew this up, you can make one up in about 30 minutes! And don’t be nervous about the little grommet at the top – that couldn’t be easier to install. You don’t need any tools!

Note: I don’t really recommend hanging this for any length of time from your charger, you don’t want to put a ton of weight on that. I keep a Command Hook next to my outlet and hang it there – it’s super convenient and doesn’t put any stress on your charger or the outlet!

Cell Phone Charger Holder

This sweet little pocket all dressed up with a bow is the perfect size for holding your phone, tucking in your charging cord, and even a set of earbuds! Wouldn’t that be a fun gift? A cute little wall charger holder and a matching set of earbuds!

Let’s get started!

Materials:

  • Fabric
    • Main Front and Back – 2 pieces 10 1/2″ x 6″
    • Pocket Front and Back – 2 pieces 7″ wide at top and 6″ wide at the bottom, and 5″ tall
  • Fusible Fleece – one piece 10 1/2″ x 6 and one piece 7″ x 5″
  • Ribbon – 10″
  • Pom Pom Trim – 30″
  • 1 Plastic Curtain Grommet

To start, cut out all your fabric and fleece pieces. Iron the fleece to the back side of one of the pocket pieces and one of the main pieces. I like to fuse it to the pieces that will be the front, it keeps everything looking nice.

Wall Charger Pocket Pieces

Sew the two pocket pieces together just along the top edge, with right sides together and a 1/4″ seam allowances. Fold the pieces so the right sides are out and press.

Wall Charger Pocket

Sew the ribbon 3/8″ down from the top edge, along both sides of the ribbon. Form a little bow with the extra ribbon and hand sew the bow in place.

Front Pocket with Bow

Place the front pocket on the front main piece (the one with the fusible fleece on the back side) and line up the bottom edge and the sides. Sew the sides and bottom down with a 1/4″ seam allowance. Because the top of the pocket is wider, the pocket will stick out from the main piece just a bit.

Sewing front pocket to back

Use a spool of thread as a guide and trim all four corners so they are rounded. Sew your pom pom trim around the edge of the holder, 3/8″ in from the edge. Make sure the pom poms are pointing towards the center. Overlap the trim at the bottom and point it towards the edge, you’ll sew over this but it makes a nice tidy look once you turn everything right side out.

Pom Pom trim on edge

Pin the back main piece to the front main piece so that the right sides are together. Sew around the sides and leave an 2″ opening on one side, above the pocket. Turn the holder right side out through the opening. Press everything, then hand sew the opening closed.

Sewing front to back

Put the plastic curtain grommet in place, following the instructions on the package. These just snap into place, super easy. There are lots of grommets in the package so it works out great to make up a bunch of these for friends!

Grommet in Wall Charger

And that’s it! You have a super cute place for your phone while it’s charging – and a super safe place too!

Cell Phone Wall Pocket

I’d love to see a photo if you make one! –  Source

RECYCLED TOILET PAPER ROLLS EASY DIY PHONE HOLDER

Easy DIY Phone Holder

Although you can always buy a phone holder, wouldn’t it be nice to be able to create one by yourself? If you are looking to replace your old phone holder or simply need a new project to recycle those toilet paper rolls, this easy DIY phone holder is sure to inspire you!

This phone stand is perfectly customizable and super useful! I used washi tape to decorate the exterior but tissue paper or fabric will work just as great. Add your own touch to this project by using your favorite decorations! I think it’s a very cool, stylish and unique idea and it adds a fun element to your home decor!

Easy DIY Phone Holder

Or maybe you need a gift idea? Then make a special homemade gift for the avid cell phone user in your life. It’s super easy and quick to make and it only requires a few materials you most likely have already. You’ll get to make a gift that says you care and your friends will be impressed! – Source

LEAVE A REPLY

Please enter your comment!
Please enter your name here